building-agents/module.py

import numpy as np


class DG:
    """simulate a diesel generator"""

    def __init__(self, parameters):
        self.current_output = None
        self.name = parameters.keys()
        self.a_factor = parameters['a']
        self.b_factor = parameters['b']
        self.c_factor = parameters['c']
        self.power_output_max = parameters['power_output_max']
        self.power_output_min = parameters['power_output_min']
        self.ramping_up = parameters['ramping_up']
        self.ramping_down = parameters['ramping_down']

    def step(self, action_gen):
        output_change = action_gen * self.ramping_up
        output = self.current_output + output_change
        if output > 0:
            # output = max(self.power_output_min, min(self.power_output_max, output))
            output = max(0, min(self.power_output_max, output))
        else:
            output = 0
        self.current_output = output

    def get_cost(self, output):
        cost = (self.a_factor * pow(output, 2) + self.b_factor * output + self.c_factor)
        return cost

    def reset(self):
        self.current_output = 0


class Battery:
    """simulate a battery"""

    def __init__(self, parameters):
        self.current_capacity = None
        self.energy_change = None
        self.capacity = parameters['capacity']
        self.min_soc = parameters['min_soc']
        self.max_soc = parameters['max_soc']
        self.degradation = parameters['degradation']
        self.holding = parameters['holding']
        self.max_charge = parameters['max_charge']
        # self.max_discharge = parameters['max_discharge']
        self.efficiency = parameters['efficiency']

    def step(self, action_battery):
        energy = action_battery * self.max_charge
        current_energy = self.current_capacity * self.capacity
        updated_capacity = np.maximum(self.min_soc, np.minimum(self.max_soc, (current_energy + energy) / self.capacity))
        # if charge, positive, if discharge, negative
        self.energy_change = (updated_capacity - self.current_capacity) * self.capacity
        self.current_capacity = updated_capacity  # update capacity to current state

    def get_cost(self, energy_change, energy_hold):  # cost depends on the energy change
        cost = abs(energy_change) * self.degradation + energy_hold * self.holding
        return cost

    def SOC(self):
        return self.current_capacity

    def reset(self):
        self.current_capacity = np.random.uniform(0.2, 0.8)


class Solar:
    """simulate a solar panel"""

    def __init__(self, parameters):
        self.current_power = None
        self.base_voltage = parameters['V_b']
        self.adjusted_voltage = self.base_voltage
        self.sc_current = parameters['I_sc0']
        self.oc_voltage = parameters['V_oc0']
        # self.s_resistance = parameters['R_s']
        self.sh_resistance = parameters['R_sh']
        self.temper_coefficient = parameters['T_c']
        self.opex_cofficient = parameters['O_c']
        self.refer_irradiance = parameters['I_ref']
        self.refer_temperature = parameters['T_ref']

    def step(self, temperature, irradiance, action_voltage=0):
        I_sc = self.sc_current * (irradiance / self.refer_irradiance)
        V_oc = self.oc_voltage + self.temper_coefficient * (temperature - self.refer_temperature)

        current = I_sc - (V_oc / self.sh_resistance)
        self.adjusted_voltage = self.adjusted_voltage * (1 + action_voltage)
        self.current_power = max(self.adjusted_voltage * current, 0)
        return self.current_power

    def get_cost(self, current_power):
        cost = current_power * self.opex_cofficient
        return cost

    def reset(self):
        self.current_power = 0


class Wind:
    """simulate a wind turbine"""

    def __init__(self, parameters):
        self.current_power = None
        self.cutin_speed = parameters['cutin_speed']
        self.cutout_speed = parameters['cutout_speed']
        self.rated_speed = parameters['rated_speed']
        self.air_density = parameters['air_density']
        self.rotor_radius = parameters['rotor_radius']
        self.power_coefficient = parameters['power_coefficient']
        self.generator_efficiency = parameters['generator_efficiency']
        self.opex_cofficient = parameters['opex_cofficient']

    def step(self, wind_speed):
        constant = 0.5 * self.air_density * np.pi * self.rotor_radius ** 2 * self.power_coefficient * self.generator_efficiency
        if self.cutin_speed <= wind_speed < self.rated_speed:
            self.current_power = constant * wind_speed ** 3 / 1e3
        elif self.rated_speed <= wind_speed < self.cutout_speed:
            self.current_power = constant * self.rated_speed ** 3 / 1e3
        else:
            self.current_power = 0
        return self.current_power

    def gen_cost(self, current_power):
        cost = current_power * self.opex_cofficient
        return cost

    def reset(self):
        self.current_power = 0


class Grid:
    """simulate a grid"""

    def __init__(self):
        self.on = True
        self.delta = 1
        if self.on:
            self.exchange_ability = 100
        else:
            self.exchange_ability = 0

    def get_cost(self, current_price, energy_exchange):
        return current_price * energy_exchange * self.delta

    def retrieve_past_price(self):
        result = []
        # 过去24小时的价格起始、结束索引
        start_index = max(0, 24 * (self.day - 1) + self.time - 24)
        end_index = 24 * (self.day - 1) + self.time
        past_price = self.price[start_index:end_index]
        result.extend(past_price)
        # current_day_price = self.price[24 * self.day:24 * self.day + self.time]
        # result.extend(current_day_price)
        return result